5. RPMI-1640, Powder, 10 L $59; 50 L$250

SKU: G4531P-10L, 50 L
$1.00
In Stock
SKU: G4531P-10L, 50 L Categories: ,

Description

Please click here to see the video. thanks

and another video to see the product quality. 

Please send an Email to for more information. Thanks.

Product IntroductionRelated Products

Product Information

Product Name Cat. No. Spec.
DMEM, High Glucose, powder G4511P-1L 1L
G4511P-10L 10L
G4511P-50L 50L

 


Product Description

This product is powder DMEM high glucose medium, containing 4 mM L-alanyl-L-glutamine, 1 mM sodium pyruvate, phenol red indicator, without HEPES, additional sodium bicarbonate is required for use.

 


Storage and Shipping Conditions

Ship at room temperature; Store away from light at 2-8℃, valid for 3 years.

 


Assay Protocol

Preparation

1. Prepare clean container close to final volume.

2. Prepare distilled water at room temperature (15-30°C) or water for cell injection (recommended G4701).

3. Prepare 1 N NaOH and 1 N HCl.

Steps to prepare solution with dry powder

1. Fill the prepared clean container with 95% final volume of distilled water, take 1 bottle of this product (can prepare 1 L of culture medium) or weigh the powder according to the proportion and put it into the water to dissolve. Note that the powder can be quickly dissolved after disintegration in water, such as high-speed stirring may make the powder into a mass, the formation of water film on the surface, but not conducive to dissolution. Therefore, the powder into the water without high-speed stirring.

2. After the powder is dissolved, add sodium bicarbonate according to the dosage of 3.7g/L and stir to dissolve. If you need to prepare other volumes, add sodium bicarbonate according to the corresponding volume.

3. Adjust pH to 0.2-0.3 units below working pH with 1 N NaOH and 1 N HCl (recommended working pH 7.0-7.4). The solution will increase in pH by 0.1-0.3 units after filtration.

4. Add water to fix the volume to the final volume. Keep the solution sealed before filtration.

5. Filtration into sterile containers using 0.2 μm membranes (note sterile handling).

6. After filtration, a little liquid can be taken for aseptic inspection and used after passing. The prepared liquid medium is stored at 2-8℃ and valid for 1 years.

 


Note

1. Dry powder is easy to absorb moisture, seal in time after use.

2. Take care to protect yourself when taking dry powder to prevent inhalation.

3. Keep the medium container covered during stirring and filtering, and stop stirring when the dry powder is dissolved.

4. For your safety and health, please wear safety glasses, gloves and protective clothing.

 

For Research Use Only!

Product recommendation
Cat.No.
Product Name
Spec.
Operation
G4511P-10L
DMEM, High Glucose, Powder
10 L
G4511P-1L
DMEM, High Glucose, Powder
1 L
G4531P-10L
RPMI-1640, Powder
10 L
G4531P-1L
RPMI-1640, Powder
1 L

Shopping Cart
No products in the cart.