No products in the cart.
4. RNase Remover 250 mL, $110
$110.00
In Stock
Description
Product Information
| Product Name | Cat.No. | Spec. |
| RNase Remover | G3032-250ML | 250 mL |
Description
This product is specially developed for the removal of solid phase surface ribonuclease (RNase) contamination of plastic or glass solutions by direct contact to destroy RNase. It contains three main active ingredients that can destroy RNase.
A large number of experiments have proved that the RNase cleaning solution set can effectively remove the RNase pollution on the plastic surface, glass surface, experimental table, instrument plastic glass surface, stainless steel metal surface, and can effectively remove the high concentration of RNase A on the solid surface. After the solid surface is treated with this product and the matching solution is cleaned, there will be no reagent residue, and the enzymatic reaction will not be affected.
Storage and Handling Conditions
Transport at room temperature; Store at room temperature, valid for 24 months.
Component
| Component Number | Component | G3032-250ML |
| G3032-1 | RNase Remover A Liqiud | 250 mL |
| G3032-2 | RNase Remover B Liquid | 250 mL |
| Product Manual | ||
Instruction
1. Remove the bottle cap of the RNase cleaning liquid A and B, tear the sealing film, and replace the nozzle respectively. The nozzle switch can be rotated and adjusted, when not in use, please adjust the nozzle above to “X”, that is, can not spray; Adjust to “…… “when in use. , that is, the linear spraying state; When adjusted to the sprinkling icon, spray in multiple directions.
2. Spray or apply RNase scavenging solution A on the solid surface to be cleaned, and wipe back and forth with paper towels.
3. Spray the same position with RNase-clearing solution B and wipe dry with a clean paper towel.
Note:
1. This product is safe to use and non-toxic, and the surface of corrosive metals will be slightly corroded when used for a long time. Do not touch skin, eyes or mucous membranes when spraying. In case of accidental contact, wash immediately with clean water. If serious, please seek medical advice in time.
2. This product is only applicable to the solid surface of plastic or glass. For non-stainless-steel metal (corrosive metal), it will be slightly corroded after long-term use, so it is necessary to rinse with nuclease-free water or wipe it clean several times after use.
3. RNase scavenging liquid A may precipitate at a low temperature, which can be recovered by heating at 37 ° C without affecting the use effect.
4. For your safety and health, please wear a lab coat and disposable gloves when performing operations.
For Research Use Only!
